This is a 2024 e-clutch CB650R with the old style shrouds installed, including the Black edition shroud faceplate and decals.
Installation pictures are here: https://imgur.com/a/EaSxj8I
I ordered all the parts from the diagram, but it turns out I didn’t need all parts, as they’re either already (re-used) on the e-clutch version, or come pre-installed on other ordered parts.
Parts needed:
| Part No. | Description |
|---|---|
| 64310-MKY-DP0ZB SHROUD SET A R. (WL) NH | Black edition faceplate with embossed CB logo. Cheaper to get this part than a faceplate and embossed decal in separate orders |
| 64410-MKY-DP0ZB SHROUD SET A L. (WL) NH | See above |
| 64320-MKN-D50 | SHROUD ASSY. B R. |
| 64420-MKN-D50 | SHROUD ASSY. B L. |
| 64331-MKN-D50 | SHROUD C R. |
| 64431-MKN-D50 | SHROUD C L. |
| 64336-MKN-D50 | BOX R. AIR DUCT |
| 64436-MKN-D50 | BOX L. AIR DUCT |
| 64660-MKN-D50 | STAY L. SHROUD |
| 64650-MKN-D50 | STAY R. SHROUD |
| 4 x 90111-KW3-003 | NUT COWL SETTING 5MM |
| 2 x 90116-SP0-003 | CLIP BUMPER SEAL (plastic rivet push, like a longer version of 90116-K0A-E11, strongly recommended) |
| 4 x 90133-MKN-D50 | (SCREW PAN 5X16) |
Parts not needed:
| Part No. | Description |
|---|---|
| 64322-MKN-D50 | foam seal shroud, installed already on 64320-MKN-D50/64420-MKN-D50 |
| 90116-K0A-E11 | plastic rivet push, already on e-clutch edition |
| 90133-KPP-T00 | screw pan 6X14, already on e-clutch edition |
| 90125-MKN-D50 | SCREW PAN 6X14, already on e-clutch edition |
| 90503-MJE-D40 | COLLAR MOUNTING, already on e-clutch edition |
| 95701-06012-08 | BOLT FLANGE 6X12, already on e-clutch edition |
| 93903-24320 | SCREW TAPPING 4X12, there are 6 on the e-clutch shroud’s version |
I recommend google searching for each part as the price and shipping varies massively. The bulk of parts came from bikerz bits but the shipping total was more than the parts themselves, still cheaper than going only local sourced though.
For the shiny logo on the tank, it’s from the black edition:
| Part No. | Description |
|---|---|
| 86201-MKY-DP0ZA | Sticker logo Honda wing right |
| 86202-MKY-DP0ZA | Sticker logo Honda wing left |
The existing tank sticker is under the clear coat but the decals from the black edition are EXACTLY the same size as the sticker. Each letter and wing part come as separate stickers on the same sticky back paper, so you just carefully place each one-by-one over the existing sticker.
Nice clean bike, how are you liking the inline-4 riding experience? I currently have a 2012 Street Triple which is pretty similar and I absolutely love it.
Love living at the top end of the rev range myself, big difference from the single cylinder 125
I came from a single cylinder 250 and I spend 99% of my time below 6k lol on the Street Triple. It already has crazy torque, but when I let it wind out and feel the surge of torque at 8k-9k, I feel nearly invincible and going into warp drive.