Yeah I did not get to add the soldering part to the video… with a soldering iron, I use 60/40 (lead/tin) solder and go over the front, back, sides, then the back again and finish the front as smooth as possible.
On this piece you can see the solder work is black, that’s a patina that’s applied after roughing it up with some steel wool. There’s black and copper patina, or you can leave it silver.
After cleaning it all up, I finish with a microfibre cloth and some car wax to protect the piece and keep the dust off. I’ll see if I have any soldering clips I can upload.
It’s fun! With all art, sometimes projects get bumped for a commission or because I working on something new is more exciting haha… I am down to one glass project on the go right now… I can’t wait to share it!!
So there’s no glue and the metal doesn’t fuse into the glass, but the overhang of the solder once it’s cooled acts as a picture frame for each shard and then a complete frame for the whole piece? That’s amazing.
And you definitely did great work on the smooth part of the soldering, all of those front-facing lines look very even and smooth.
Ha, easy to bump projects, i got all excited about these t-shirt designs but after four designs i started up a podcast and got super distracted throwing myself into the episodes. It’s great to feel that inspiration though when you like a project so much you can be reasonably assured it’ll develop into something you’re proud of.
Well, I’m excited to see the new piece, thanks for sharing all this information with me, I would have no idea how something like this worked otherwise.
Are there special glass paints to use for the colors?
Bingo! I always had the conception that molten glass was involved… not the case lol.
T-shirts and podcasts are fun as well! I always need something to listen to while I’m working if you’re interested in sharing at all :)
There are glass paints that cure in a kiln, I haven’t got that resource yet… I used glass paint that just dried normally on one piece and it still looks good over a year later. More recently, I used my UV curing lamp and gel nail polish to finish some lettering on a piece… so far so good! Make use of what’s on hand hahaha literally
yeaj, the process you actually go through is even more impressive than the already incredibly difficult fantasia-sequence molten glass process I imagined, haha!
creating a 40 piece picture frame or 60 piece or whatever it is, jeez, that is very cool, and to get it so smooth.
the first two episodes are out and new eps will be coming out every Wednesday for a long time to come, travel stories and information.
those paints came out great, very vibrant colors, and the car polish you added is such a smart idea, they’ll probably look that way forever.
the nail polish in UV lamp are another good idea, what’s on hand is the way to go, I ended up using strips of old pool noodles lying around as sound insulation for the office I record the podcast in just the other day.
I’ll be on the lookout for whatever you post here next. or I’ll remember you from Lemmy when your YT shorts blow up!
Yeah I did not get to add the soldering part to the video… with a soldering iron, I use 60/40 (lead/tin) solder and go over the front, back, sides, then the back again and finish the front as smooth as possible.
On this piece you can see the solder work is black, that’s a patina that’s applied after roughing it up with some steel wool. There’s black and copper patina, or you can leave it silver.
After cleaning it all up, I finish with a microfibre cloth and some car wax to protect the piece and keep the dust off. I’ll see if I have any soldering clips I can upload.
It’s fun! With all art, sometimes projects get bumped for a commission or because I working on something new is more exciting haha… I am down to one glass project on the go right now… I can’t wait to share it!!
So there’s no glue and the metal doesn’t fuse into the glass, but the overhang of the solder once it’s cooled acts as a picture frame for each shard and then a complete frame for the whole piece? That’s amazing.
And you definitely did great work on the smooth part of the soldering, all of those front-facing lines look very even and smooth.
Ha, easy to bump projects, i got all excited about these t-shirt designs but after four designs i started up a podcast and got super distracted throwing myself into the episodes. It’s great to feel that inspiration though when you like a project so much you can be reasonably assured it’ll develop into something you’re proud of.
Well, I’m excited to see the new piece, thanks for sharing all this information with me, I would have no idea how something like this worked otherwise.
Are there special glass paints to use for the colors?
Bingo! I always had the conception that molten glass was involved… not the case lol.
T-shirts and podcasts are fun as well! I always need something to listen to while I’m working if you’re interested in sharing at all :)
There are glass paints that cure in a kiln, I haven’t got that resource yet… I used glass paint that just dried normally on one piece and it still looks good over a year later. More recently, I used my UV curing lamp and gel nail polish to finish some lettering on a piece… so far so good! Make use of what’s on hand hahaha literally
“…that molten glass was involved…”
yeaj, the process you actually go through is even more impressive than the already incredibly difficult fantasia-sequence molten glass process I imagined, haha!
creating a 40 piece picture frame or 60 piece or whatever it is, jeez, that is very cool, and to get it so smooth.
the podcast is called “bit of a rambler”, it’s everywhere podcasts are, main page here: https://www.spreaker.com/podcast/bit-of-a-rambler--6571124
the first two episodes are out and new eps will be coming out every Wednesday for a long time to come, travel stories and information.
those paints came out great, very vibrant colors, and the car polish you added is such a smart idea, they’ll probably look that way forever.
the nail polish in UV lamp are another good idea, what’s on hand is the way to go, I ended up using strips of old pool noodles lying around as sound insulation for the office I record the podcast in just the other day.
I’ll be on the lookout for whatever you post here next. or I’ll remember you from Lemmy when your YT shorts blow up!